Spot spraying
Spray the weeds.
Spray the weeds.
Not the field.
Spot spraying for the sprayer you already own: cameras fire only the nozzle over each weed.
Up to 90%
Herbicide reduction
Fallow and pre-emergence passes
1
Nozzle at a time
Not a section. The individual nozzle.
10mph
Operating speed
Decision made on the boom, no cloud
What changes.
Spray the weed. Leave the field alone.
Fallow is mostly bare ground, so most of the tank is still full when you're done.
Cleaner crops
Less drift, less overlap, less herbicide where you didn't mean it.
As-applied records
Every weed and nozzle activation, GPS-mapped into FarmIQ, with what you saved.
How it runs
- RGB cameras on the boom scan as you drive
- On-machine AI finds green on brown: weeds on bare soil
- Individual nozzle control fires only over confirmed weeds
Specs
- Boom width: any size
- Speed: up to 10 mph
- Nozzle spacing: 15–20 inches typical
- Weather-resistant housings
- Day and night (boom lights)
- PWM nozzle control: CapstanAg PinPoint III or ARAG FlowTron
- In-cab tablet display
- FarmLink RTK GPS + connectivity
In the cab.
Every pass, mapped
Green where it sprayed, grey where it skipped bare ground.
Rate and pressure, one tap
Presets for both. Or set your own.
Day or night
Night mode for the late passes. Same screen, easy on the eyes.
The backstory
Built from scratch.
One team built the hardware, software, wiring and nozzle control. It's on customer booms now, not a pilot.
Run the numbers on your acres.
Try the calculator, then call us for an honest number.
Also on FarmDefender™: Rock Detection →